Compare · Windows or Android for Zone 2

BARTEC ET60/65EX2 Android vs Getac F110-EX G7

These two rugged tablets do different jobs. The BARTEC ET60/65EX2 Android is a 10.1-inch, 1,074 g tablet that runs Android 14 and carries a UL listing for Class I Division 2 on its North America types. The Getac F110-EX G7 is an 11.6-inch, 1,680 g tablet that runs Windows 11 Pro on a 13th-generation Intel Core processor and is certified up to +60 °C. Both are intrinsically safe (Ex ic), IIC T4, certified for Zone 2/22, with hot-swap batteries that are changed outside the hazardous area only. Neither may be used in Zone 1. Here is how they compare, and which we would choose for which team.

Our verdict

Which should you choose?

Start with the software your crews run. If your apps are Android, or you need a North American Class I Division 2 listing or a published ATEX certificate, we would choose the BARTEC ET60/65EX2 Android, which is also 606 g lighter. If your crews need Windows desktop software on a large screen, or your sites run hotter than +55 °C, we would choose the Getac F110-EX G7, keeping in mind that its certification in our data is IECEx only and we have found no North American listing for it.

Choose the BARTEC ET60/65EX2 Android if…

  • Your apps and device management are built for Android: it runs Android 14, and BARTEC’s datasheet says it is upgradeable to Android 16.
  • You work in North America: it holds a UL listing for Class I Division 2 Groups A to D for the B7-T2E1 and B7-T2E3 types, where our data has no North American listing for the Getac F110-EX G7.
  • Your safety file asks for a published ATEX certificate: BARTEC publishes EPS 25 ATEX 1 087 X, while Getac states ATEX certification but has not published the certificate.
  • Crews carry the tablet through a whole shift: it weighs 1,074 g against 1,680 g.
  • Your teams photograph assets as well as scan them: it has a 16 MP autofocus rear camera with flash, against 8 MP.
BARTEC ET60/65EX2 Android in full

Choose the Getac F110-EX G7 if…

  • Your crews need Windows desktop software: it runs Windows 11 Pro on an x86 Intel Core i5 or i7, which our data lists as not possible on the BARTEC ET60/65EX2 Android.
  • You read drawings and work packs on site: its screen is 11.6 inches at 1,200 nits, against 10.1 inches at 1,000 nits.
  • Your sites run hot: it is certified from −21 °C to +60 °C ambient, against −20 °C to +55 °C.
  • You need local storage and memory: it has 16 GB of RAM (32 GB optional) and a 256 GB SSD with options up to 2 TB, against 8 GB and 128 GB plus microSD.
  • Your rounds read tags: it offers an optional built-in HF RFID reader at 13.56 MHz as well as the optional 1D/2D imager.
Getac F110-EX G7 in full

Key differences

Where they differ

  • Android or Windows

    BARTEC ET60/65EX2 Android
    Android 14
    Getac F110-EX G7
    Windows 11 Pro

    This decides the job. The BARTEC ET60/65EX2 Android runs Android 14 on an Arm processor, so it suits Android apps and the push-to-talk and scanning apps built for them. The Getac F110-EX G7 runs Windows 11 Pro on x86, so it runs desktop Windows software natively.

  • North American listing

    BARTEC ET60/65EX2 Android
    UL (report E321557-20260130; certificates UL-US-26103088-0, UL-US-26103089-0, UL-CA-2675759-0, UL-CA-2675760-0, issued 2026-02-09), North America types B7-T2E1 / B7-T2E3 only: Class I Div 2 Groups A, B, C, D; Class II Div 2 Groups F, G; Class III Div 2; T4. Zone 2 AEx ic [op is] IIC T4 Gc; Zone 22 AEx ic [op is] IIIB T135 °C Dc (CEC: Ex ic [op is] IIC T4 Gc X / IIIB T135 °C Dc X). Zone 22 is group IIIB under NEC/CEC, not IIIC.
    Getac F110-EX G7
    Not in our data

    The BARTEC ET60/65EX2 Android has a UL listing for Class I, II and III Division 2, for the North America types only. Our data has no North American listing for the Getac F110-EX G7, so check with Getac before specifying it for a Division 2 site.

  • Weight

    BARTEC ET60/65EX2 Android
    1074 g
    Getac F110-EX G7
    1680 g

    The BARTEC ET60/65EX2 Android weighs 1,074 g and the Getac F110-EX G7 1,680 g, a gap of 606 g. You notice that on a strap or in one hand through a shift.

  • Screen size

    BARTEC ET60/65EX2 Android
    10.1-inch Optically bonded, multi-mode capacitive touch, Corning Gorilla Glass
    Getac F110-EX G7
    11.6-inch TFT LCD, wide viewing angle, LumiBond optically bonded

    The Getac F110-EX G7 has an 11.6-inch screen and the BARTEC ET60/65EX2 Android a 10.1-inch one, both optically bonded. The larger screen suits drawings and desktop applications. The smaller one suits a tablet that is carried and used on the move.

In the field

Head to head, by kind of work

Software platform and performance

Even

This is a choice of platform before it is a choice of tablet. The BARTEC ET60/65EX2 Android runs Android 14 with Zebra Mobility DNA and LifeGuard on a Qualcomm 6490 octa-core Arm processor with 8 GB of RAM and 128 GB of storage, plus a microSD slot of up to 2 TB. BARTEC’s datasheet says it is upgradeable to Android 16. It comes as the Wi-Fi-only ET60 or the 5G ET65.

The Getac F110-EX G7 runs Windows 11 Pro on a 13th-generation Intel Core i5 or i7 with 16 GB of DDR5 (32 GB optional) and a 256 GB SSD, with options up to 2 TB. It has Wi-Fi 6E and Bluetooth 5.3, with optional 4G LTE or 5G Sub-6. Pick it when the application in your field workflow is a Windows program. Pick the BARTEC ET60/65EX2 Android when your workflow runs in Android apps.

Certification, North America and heat

Edge: BARTEC ET60/65EX2 Android

Both are marked Ex ic op is (the BARTEC ET60/65EX2 Android only with its optional scan engine, otherwise Ex ic), IIC T4 Gc for gas and IIIC Dc for dust, for Zone 2/22. The BARTEC ET60/65EX2 Android holds ATEX (EPS 25 ATEX 1 087 X) and IECEx (EPS 25.0018X) certificates, with a dust surface temperature of 135 °C and IP64 in the marking. The Getac F110-EX G7 holds IECEx EPS 21.0079X, with a dust limit of 130 °C. Getac also states ATEX certification, but the certificate is not published. Its IECEx certificate names the model “F110-Exc” without the generation, and our match to this tablet is unconfirmed, so confirm the exact model with Getac.

For North America, the BARTEC ET60/65EX2 Android is listed by UL for Class I Division 2 Groups A to D, Class II Division 2 Groups F and G, and Class III Division 2, at T4. That covers the B7-T2E1 and B7-T2E3 types only, and under the NEC and CEC its Zone 22 dust group is IIIB, not IIIC. Our data has no North American listing for the Getac F110-EX G7. Heat goes the other way: the Getac F110-EX G7 is certified to +60 °C ambient, against +55 °C.

Scanning, screen and carrying

Even

Both can scan with a built-in engine. The BARTEC ET60/65EX2 Android takes an optional SE55 1D/2D scan engine, which changes its Ex marking to “op is”. The Getac F110-EX G7 offers an optional integrated 1D/2D imager and an optional HF RFID reader. For photos, the BARTEC has a 16 MP autofocus rear camera with flash and an 8 MP front camera with a mechanical privacy shade; the Getac has an 8 MP autofocus rear camera and a 5 MP front camera. Both read NFC, the Getac through its optional reader.

The Getac F110-EX G7 has the bigger display: 11.6 inches at 1,920 × 1,080 and 1,200 nits, with a digitizer pen. The BARTEC ET60/65EX2 Android is 10.1 inches at 1,000 nits and takes bare or gloved fingertip or stylus input; our data does not confirm glove touch for the Getac. The BARTEC lists a 1.5 m drop to concrete and the Getac a 1.2 m drop in use, and both cite MIL-STD-810H. Getac lists IP66; for the BARTEC, IP64 is in the Ex marking and its datasheet says IP66, so we treat its figure as unconfirmed.

Battery, charging and ports in the zone

Even

Both tablets have a user-replaceable, hot-swap battery, and both must be changed and charged outside the hazardous area. The BARTEC ET60/65EX2 Android has an 8920 mAh battery, and an internal supercapacitor keeps power during swaps. BARTEC states up to 10 hours indoors with WLAN on and a 50 % backlight. The Getac F110-EX G7 uses two 2680 mAh batteries (typical, 11.4 V), with larger 4200 mAh ones optional, and its LifeSupport technology allows swapping. Our data has no runtime figure for the Getac, so we do not compare battery life.

Ports differ in the zone. The BARTEC’s USB-A, USB-C, dock and keyboard connectors may be used only if the atmosphere is shown to be absent, and its charging accessories are not included. On the Getac F110-EX G7, the certificate bars every connection interface from hazardous areas, and its SIM and spare SSD are replaceable in non-hazardous areas only. Either way, plan to dock, charge and transfer data at a safe-area point.

Specifications

Full specifications side by side

BARTEC ET60/65EX2 Android vs Getac F110-EX G7: full specifications
BARTEC ET60/65EX2 AndroidGetac F110-EX G7
Ex rating
Certified forZone 2/22Zone 2/22
ProtectionIntrinsic safety (Ex ic) with inherently safe optical radiation (op is)Intrinsic safety (Ex ic) with inherently safe optical radiation (op is)
Gas groupIICIIC
Temperature classT4 (≤ 135 °C)T4 (≤ 135 °C)
Certification
ATEX markingII 3G Ex ic op is IIC T4 Gc / II 3D Ex ic op is IIIC T135°C Dc IP64II 3G Ex ic op is IIC T4 Gc / II 3D Ex ic op is IIIC T130°C Dc
ATEX certificateEPS 25 ATEX 1 087 XNot published
IECEx markingEx ic op is IIC T4 Gc / Ex ic op is IIIC T135°C Dc IP64Ex ic op is IIC T4 Gc / Ex ic op is IIIC T130°C Dc
IECEx certificateIECEx EPS 25.0018X (Issue 0, 2025-08-26)IECEx EPS 21.0079X (Issue 2, 2025-01-31, model "F110-Exc")Unconfirmed, see note 1
Other approvalsCE, FCC/ICMIL-STD-810H (third-party lab per datasheet)
North AmericaUL (report E321557-20260130; certificates UL-US-26103088-0, UL-US-26103089-0, UL-CA-2675759-0, UL-CA-2675760-0, issued 2026-02-09), North America types B7-T2E1 / B7-T2E3 only: Class I Div 2 Groups A, B, C, D; Class II Div 2 Groups F, G; Class III Div 2; T4. Zone 2 AEx ic [op is] IIC T4 Gc; Zone 22 AEx ic [op is] IIIB T135 °C Dc (CEC: Ex ic [op is] IIC T4 Gc X / IIIB T135 °C Dc X). Zone 22 is group IIIB under NEC/CEC, not IIIC.Not in our data
Protection level (EPL)Gc / DcGc / Dc
Dust groupIIICIIIC
Max surface temperature (dust)135 °C130 °C
Safe use
Ambient temperature (Ta)−20 °C to +55 °C−21 °C to +60 °C
ChargingOutside the hazardous area onlyOutside the hazardous area only
Battery swapOutside the hazardous area onlyOutside the hazardous area only
Ports and accessories in the zonePorts (USB-A, USB-C, dock, keyboard connector) only if the atmosphere is shown to be absent; charging accessories are required but not included.All connection interfaces (USB, Thunderbolt, DC-in, docking connector, LAN, serial) must never be used in hazardous areas (certificate condition). Optional internal modules named in the certificate are covered as part of the certified tablet. SIM and spare main storage (SSD canister) are replaceable in non-hazardous areas only.
Certified accessoriesNamed in IECEx EPS 25.0018X as 'accessories for use in hazardous areas': battery B7-T2Z0-0001 (3.8 V / 8920 mAh), kickstand with hand strap B7-T2Z0-0003, hand strap B7-T2Z0-0004, shoulder strap B7-T2Z0-0006, screen protector B7-T2Z0-0008, stylus holder B7-T2Z0-0009, leather holster B7-T2Z0-0010, stylus 17-S1Z0-0008. Battery changing and charging only outside hazardous areas; charging accessories are for use outside hazardous areas.Named in the IECEx certificate as usable with the tablet: shoulder strap, hand strap, 4-point shoulder harness, capacitive hard-tip stylus and tether, digitizer pen and tether. Anti-static screen protection film (Getac accessory made for hazardous use). Hard handle (factory option, datasheet) is NOT named in the certificate accessory list. Keyboard: none offered for F110-EX. NOT for hazardous areas (Getac accessory brochure): AC adapters, multi-bay and external chargers, spare batteries (replace in non-hazardous areas only). DS100 USB-C docking station (datasheet option) is not an Ex-listed accessory.Unconfirmed, see note 2
IP code in the Ex certificateIP64 (marking)Not in our data
Operating temperature−20 °C to +55 °C−21 °C to +60 °C (standard F110: −29 to +63)
Conditions of useIECEx X conditions: battery pack changed or charged only outside hazardous areas; only battery pack type B7-T2Z0-0001/**** shall be used; connection or disconnection of external ports, opening the enclosure or replacing the battery while live only if the atmosphere is shown to be absent; protect from high-energy impacts and high electrostatic charge; follow the manufacturer's safety instructions strictly. Ambient −20 °C to +55 °C.Use only in a controlled environment with suitably reduced pollution. Protect from impacts with high impact energy, high electrostatic charge generating processes and excessive UV light. Connection interfaces never used in hazardous areas. Battery never changed, charged or removed in hazardous areas. Use only Li-ion battery BP3S1P2680B or BP3S2P2100S-02.
Device
TypeRugged tablet, Ex versionRugged tablet, Ex version
Launched2025Unconfirmed, see note 3Not in our data
Part numbersB7-T2E*-************ (B7-T2E2 rest of world; B7-T2E1 North America)Not in our data
Operating systemAndroid 14Windows 11 Pro
EditionAndroid 14 with Zebra Mobility DNA / LifeGuardWindows 11 ProUnconfirmed, see note 4
OS upgradesAndroid 16 (BARTEC datasheet: 'upgradeable to Android 16')Not in our data
Security updatesUntil December 2031Unconfirmed, see note 5Supported while kept on a current Windows 11 version
ProcessorQualcomm 6490 (QCM6490) octa-core 2.7 GHzIntel Core i5-1335U / i5-1345U vPro / i7-1355U / i7-1365U vPro (13th gen)
Processor architectureArmx86
Memory (RAM)8 GB16 (option 32), DDR5
Storage128 GB, microSD (up to 2 TB)256 GB PCIe NVMe SSD (options 512 GB, 1000 GB, 2000 GB)
Field capabilities
Push-to-talkVia app (programmable keys; PTT app)Not in our data
Emergency / SOSVia app (three programmable keys, no dedicated SOS key)Not in our data
Lone workerVia app (third-party application)Not in our data
Barcode scanningBuilt in (optional SE55 1D/2D Advanced Range scan engine; changes the Ex marking to 'op is')Built in (optional integrated 1D/2D imager, factory option)
RFIDNot in our dataBuilt in (optional HF RFID reader, 13.56 MHz)
NFC readingBuilt in (NFC)Built in (via optional HF RFID reader: ISO 14443, Mifare, FeliCa)
3D scanning / LiDARNot possible (no depth sensor listed)Not in our data
High-accuracy GNSSBuilt in (ET65 only: dual-band L1 + L5 GNSS)Not in our data
Remote expert / video callsVia app (rear and front cameras, privacy shade; third-party app)Via app (5 MP front and 8 MP rear camera; Windows)
Windows desktop softwareNot possible (Android)Built in (Windows 11 Pro, x86)
Display and camera
Display10.1-inch Optically bonded, multi-mode capacitive touch, Corning Gorilla Glass11.6-inch TFT LCD, wide viewing angle, LumiBond optically bonded
Resolution1920 × 1200 (WUXGA; page prints '1900 × 1200')Unconfirmed, see note 61920 × 1080 (FHD)
Brightness1000 nits1200 nits
Outdoor readabilityOptically bonded 1000 nit display (maker: easy to view in sunlight)Getac sunlight-readable display, 1,200 nits
TouchBare or gloved fingertip or stylus inputDual-mode touchscreen (multi-touch and digitizer); glove/wet mode not stated in datasheet
Pen / stylusStylus supportedYes, digitizer pen with tether (dual-mode touch)
Rear camera16 MP autofocus with LED flash8 MP autofocus
Front camera8 MP with mechanical privacy shade5 MP webcam, or optional 5 MP Windows Hello camera
Connectivity
NetworkET60 Wi-Fi 6E; ET65 adds 5G FR1 / 4G / 3G, private 5G/CBRSWi-Fi; optional 4G LTE, 5G Sub-6
Wi-FiWi-Fi 6E (802.11ax) 2x2 MU-MIMOIntel Wi-Fi 6E AX211
BluetoothBluetooth 5.2 Class 1 + LEBluetooth 5.3
NFCYes (ISO 14443 A/B, FeliCa, ISO 15693)Optional HF RFID reader (13.56 MHz, ISO 15693, 14443 A/B, Mifare, FeliCa)
Satellite positioningET65: GPS, GLONASS, Galileo, BeiDou, QZSS dual-band L1+L5Optional dedicated GPS with L1/L5, or via 4G/5G module
SIMET65: eSIM + nano-SIMMicro-SIM (3FF), optional dual SIM with eSIM
Physical and power
Weight1074 g1680 g
Dimensions275 × 199 × 18.3 mm314 × 224 × 25.3 mm
Ingress protectionIP64Unconfirmed, see note 7IP66
Ruggedness1.5 m drop to concrete, exceeds MIL-STD-810HMIL-STD-810H; 1.2 m (4 ft) drop in use
Battery8920 mAh2 x 2680 typical (2 x 2640 min), 11.4 V; optional 2 x 4200 typical (4080 min), 11.1 V
Battery energy36Unconfirmed, see note 8Not in our data
Battery lifeUp to 10 h indoor with standard battery (WLAN on, 50 % backlight)Not in our data
Hot-swap batteryYes (internal supercapacitor keeps power during battery swaps)Yes, "LifeSupport battery swappable technology" (non-hazardous areas only)
Replaceable batteryYesYes
Ports and expansion2 x USB 3.1 Type A; 1 x USB 3.1 Type C (DisplayPort 1.2); docking connector; keyboard connector; 1 x USB 2.0 (rear); optional SE55 scan engineThunderbolt 4 Type-C x1, USB 3.2 Gen2 Type-A x1, DC-in, audio combo; top slot: 1D/2D barcode or serial + LAN; right slot: HF RFID or fingerprint reader; smart card reader (back); micro-SIM; all ports barred from hazardous areas
DockingDocking connector (charge and data); vehicle and desk accessories in BARTEC accessory sheetGetac DS100 USB-C docking station (non-hazardous areas)
KeyboardKeyboard connector for accessories (not 2-in-1)Tablet only in Ex configuration
Controls & Accessibility
KeysPower, scan, up/down (volume or brightness), three programmable keysPower + 4 programmable buttons
Push-to-talk keyNoNo
Glove touchYesNot in our data
BiometricsNot in our dataOptional fingerprint reader, optional Windows Hello face camera
Fleet and support
Preinstalled appsNot in our dataGetac Utility, Camera, Geolocation, Barcode Manager, KeyWedge Barcode Reader Utility (trial)
ManufacturerBARTEC GmbH, GermanyGetac Technology Corporation, Taiwan

Only values we could check are listed; “Not in our data” means we have not verified it, not that the tablet lacks it. A numbered marker means a value is unconfirmed, and the matching note at the foot of the page explains why. Prices are on request for both.

Impartial advice

Still deciding between the two?

Both tablets are certified for Zone 2/22, so the choice comes down to Android or Windows, your region and the weight your crews carry. Tell us about your sites and we will help you choose impartially, or check whether a Zone 1 tablet would suit better.

FAQ

Common questions

Is the BARTEC ET60/65EX2 Android better than the Getac F110-EX G7?

Neither is better across the board, because they run different platforms. The BARTEC ET60/65EX2 Android suits Android apps, North American Division 2 sites and crews who carry it all shift at 1,074 g. The Getac F110-EX G7 suits Windows software, large-screen work and sites up to +60 °C. Both are certified for Zone 2/22.

Can either tablet be used in Zone 1 or Zone 0?

No. Both are intrinsically safe (Ex ic) and certified to protection level Gc, which covers Zone 2 only, so neither is for Zone 1 or Zone 0. For Zone 1 you need a tablet certified for it, which also works in Zone 2.

Are both tablets approved for North America?

Our data shows a UL listing for the BARTEC ET60/65EX2 Android: Class I Division 2 Groups A to D at T4, for the B7-T2E1 and B7-T2E3 types only. We have found no North American listing for the Getac F110-EX G7, which is not the same as saying it has none, so ask Getac.

Which gets security updates for longer?

We cannot rank them. The Getac F110-EX G7 runs Windows 11 Pro, which is supported while it is kept on a current Windows 11 version. For the BARTEC ET60/65EX2 Android our data shows December 2031, which is Zebra’s date for the tablet it is built on, and BARTEC says it needs a LifeGuard service contract, so treat it as unconfirmed.

Can you charge or swap the battery in the hazardous area?

No. Both must be charged and have their batteries changed outside the hazardous area. Both do offer hot-swap batteries, so a tablet can keep running while you swap in a safe area. Port use in the zone is restricted on both, as the field sections explain.

Do both tablets have a built-in barcode scanner?

Both offer one as an option. The BARTEC ET60/65EX2 Android takes an SE55 1D/2D scan engine, which changes its Ex marking to “op is”. The Getac F110-EX G7 takes a factory-fitted 1D/2D imager, and an HF RFID reader is optional too. Specify the scanner when you order.

How much do the BARTEC ET60/65EX2 Android and Getac F110-EX G7 cost?

Prices depend on volume, configuration and region, so both are on request. Contact us for a price.

Notes on unconfirmed values

  1. Getac F110-EX G7: Getac's certificate names the model with a 'c' suffix and doesn't name the generation. We matched it to this generation by its batteries, dust group and ambient range.
  2. Getac F110-EX G7: Not checked against the certificate for this exact model.
  3. BARTEC ET60/65EX2 Android: Approximate: the maker doesn't publish a launch date. Based on the certificate date or the maker's announcement.
  4. Getac F110-EX G7: The maker doesn't state the edition year.
  5. BARTEC ET60/65EX2 Android: Zebra's security-update date for the ET60/ET65 the tablet is built on; BARTEC says it needs a LifeGuard service contract.
  6. BARTEC ET60/65EX2 Android: From a single or secondary source; the maker doesn't state it for this model.
  7. BARTEC ET60/65EX2 Android: BARTEC's product page gives IP64 and its datasheet IP66; IP64 is the figure in the Ex marking.
  8. BARTEC ET60/65EX2 Android: Calculated from the maker's battery capacity and voltage; the maker doesn't state watt-hours.

Facts last verified on against certificates, declarations of conformity and manufacturer data. The sources for each tablet are listed on its page: BARTEC ET60/65EX2 Android and Getac F110-EX G7. Always check the certificate for your exact model before use. Spotted an error? Tell us.