BARTEC ET60/65EX2 Android, front view

BARTEC · Rugged tablet, Ex version

BARTEC ET60/65EX2 Android

  • Zone 2/22
  • ATEX
  • IECEx
  • IIC
  • T4
  • Class I Division 2

The BARTEC ET60/65EX2 Android is the hazardous-area version of a BARTEC rugged 10.1-inch tablet, certified for Zone 2/22 under ATEX and IECEx. It is an intrinsically safe (Ex ic) design running Android 14.

Certified for
Zone 2/22
Protection
Intrinsic safety (Ex ic) with inherently safe optical radiation (op is)
Screen
10.1-inch
Temperature class
T4 (≤ 135 °C)
Ambient temperature
−20 °C to +55 °C
Operating system
Android 14
Security updates
Until December 2031Unconfirmed, see note 1
Weight
1074 g
Price
On request
Request a price
See how it compares to alternatives

Overview

Strengths and limitations

Strengths

  • ATEX and IECEx certified, with published certificate numbers
  • Also certified for Class I Division 2 in North America
  • Optional built-in barcode imager
  • 5G connectivity
  • Security updates until December 2031

Limitations

  • Zone 2 only, so not for Zone 1 areas
  • T4 temperature class: fine for most gases, but not those that ignite below 135 °C

Certification

Where you can use it

Gas

  • Zone 0not certified.Explosive gas present continuously or for long periods
  • Zone 1not certified.Explosive gas likely in normal operation
  • Zone 2certified.Explosive gas unlikely, and only briefly

Dust

  • Zone 20not certified.Combustible dust present continuously or for long periods
  • Zone 21not certified.Combustible dust likely in normal operation
  • Zone 22certified.Combustible dust unlikely, and only briefly

The Ex marking, decoded

ATEXCertificate EPS 25 ATEX 1 087 X

Gas atmospheresZone 2

II3GExicop isIICT4Gc

II Equipment group
Group II: equipment for surface industries (not mining).
3G ATEX category
Category 3 for gas: suitable down to Zone 2.
Ex Explosion protected
Certified to the IEC 60079 / EN 60079 series.
ic Protection type
Intrinsic safety, level "ic": safe in normal operation. Zone 2 only.
op is Protection type
Inherently safe optical radiation: light from the camera flash or torch is limited below the level that could ignite the atmosphere.
IIC Gas group
Gas group IIC, e.g. hydrogen and acetylene. The most demanding group; also covers IIA and IIB.
T4 Temperature class
Surface stays below 135 °C. T6 is the strictest class.
Gc Protection level
Equipment protection level Gc (enhanced): suitable for Zone 2.

Dust atmospheresZone 22

II3DExicop isIIICT135°CDcIP64

3D ATEX category
Category 3 for dust: suitable down to Zone 22.
IIIC Dust group
Dust group IIIC: conductive dust. The most demanding group; also covers IIIA and IIIB.
T135°C Max surface temperature
Surface stays below 135°C in dust.
Dc Protection level
Equipment protection level Dc (enhanced): suitable for Zone 22.
IP64 Ingress protection
Dust-tight; protected against splashing water.

IIExicop is as above.

Versions

  • Marking versions

    The certification covers more than one version: ATEX with scan engine: II 3G Ex ic op is IIC T4 Gc; without: II 3G Ex ic IIC T4 Gc | IECEx the same without 'II 3G' | ATEX with scan engine: II 3D Ex ic op is IIIC T135°C Dc IP64; without: II 3D Ex ic IIIC T135°C Dc IP64 | IECEx the same without 'II 3D'

Safe use

Rules for the hazardous area

Ambient temperature (Ta)
−20 °C to +55 °C
Charging
Outside the hazardous area only
Battery swap
Outside the hazardous area only
Ports and accessories in the zone
Ports (USB-A, USB-C, dock, keyboard connector) only if the atmosphere is shown to be absent; charging accessories are required but not included.
Certified accessories
Named in IECEx EPS 25.0018X as 'accessories for use in hazardous areas': battery B7-T2Z0-0001 (3.8 V / 8920 mAh), kickstand with hand strap B7-T2Z0-0003, hand strap B7-T2Z0-0004, shoulder strap B7-T2Z0-0006, screen protector B7-T2Z0-0008, stylus holder B7-T2Z0-0009, leather holster B7-T2Z0-0010, stylus 17-S1Z0-0008. Battery changing and charging only outside hazardous areas; charging accessories are for use outside hazardous areas.
IP code in the Ex certificate
IP64 (marking)
Operating temperature
−20 °C to +55 °C

Conditions of use

IECEx X conditions: battery pack changed or charged only outside hazardous areas; only battery pack type B7-T2Z0-0001/**** shall be used; connection or disconnection of external ports, opening the enclosure or replacing the battery while live only if the atmosphere is shown to be absent; protect from high-energy impacts and high electrostatic charge; follow the manufacturer's safety instructions strictly. Ambient −20 °C to +55 °C.

Specifications

Full specifications

Certification

ATEX marking
II 3G Ex ic op is IIC T4 Gc / II 3D Ex ic op is IIIC T135°C Dc IP64
ATEX certificate
EPS 25 ATEX 1 087 X
IECEx marking
Ex ic op is IIC T4 Gc / Ex ic op is IIIC T135°C Dc IP64
IECEx certificate
IECEx EPS 25.0018X (Issue 0, 2025-08-26)
Other approvals
CE, FCC/IC
North America
UL (report E321557-20260130; certificates UL-US-26103088-0, UL-US-26103089-0, UL-CA-2675759-0, UL-CA-2675760-0, issued 2026-02-09), North America types B7-T2E1 / B7-T2E3 only: Class I Div 2 Groups A, B, C, D; Class II Div 2 Groups F, G; Class III Div 2; T4. Zone 2 AEx ic [op is] IIC T4 Gc; Zone 22 AEx ic [op is] IIIB T135 °C Dc (CEC: Ex ic [op is] IIC T4 Gc X / IIIB T135 °C Dc X). Zone 22 is group IIIB under NEC/CEC, not IIIC.
Protection level (EPL)
Gc / Dc
Dust group
IIIC
Max surface temperature (dust)
135 °C

Device

Type
Rugged tablet, Ex version
Part numbers
B7-T2E*-************ (B7-T2E2 rest of world; B7-T2E1 North America)
Operating system
Android 14
Edition
Android 14 with Zebra Mobility DNA / LifeGuard
OS upgrades
Android 16 (BARTEC datasheet: 'upgradeable to Android 16')
Security updates
Until December 2031Unconfirmed, see note 1
Processor
Qualcomm 6490 (QCM6490) octa-core 2.7 GHz
Processor architecture
Arm
Memory (RAM)
8 GB
Storage
128 GB, microSD (up to 2 TB)

Field capabilities

Push-to-talk
Via app (programmable keys; PTT app)
Emergency / SOS
Via app (three programmable keys, no dedicated SOS key)
Lone worker
Via app (third-party application)
Barcode scanning
Built in (optional SE55 1D/2D Advanced Range scan engine; changes the Ex marking to 'op is')
NFC reading
Built in (NFC)
3D scanning / LiDAR
Not possible (no depth sensor listed)
High-accuracy GNSS
Built in (ET65 only: dual-band L1 + L5 GNSS)
Remote expert / video calls
Via app (rear and front cameras, privacy shade; third-party app)
Windows desktop software
Not possible (Android)

Display and camera

Display
10.1-inch Optically bonded, multi-mode capacitive touch, Corning Gorilla Glass
Resolution
1920 × 1200 (WUXGA; page prints '1900 × 1200')Unconfirmed, see note 3
Brightness
1000 nits
Outdoor readability
Optically bonded 1000 nit display (maker: easy to view in sunlight)
Touch
Bare or gloved fingertip or stylus input
Pen / stylus
Stylus supported
Rear camera
16 MP autofocus with LED flash
Front camera
8 MP with mechanical privacy shade

Connectivity

Network
ET60 Wi-Fi 6E; ET65 adds 5G FR1 / 4G / 3G, private 5G/CBRS
Wi-Fi
Wi-Fi 6E (802.11ax) 2x2 MU-MIMO
Bluetooth
Bluetooth 5.2 Class 1 + LE
NFC
Yes (ISO 14443 A/B, FeliCa, ISO 15693)
Satellite positioning
ET65: GPS, GLONASS, Galileo, BeiDou, QZSS dual-band L1+L5
SIM
ET65: eSIM + nano-SIM

Physical and power

Weight
1074 g
Dimensions
275 × 199 × 18.3 mm
Ingress protection
IP64Unconfirmed, see note 4
Ruggedness
1.5 m drop to concrete, exceeds MIL-STD-810H
Battery
8920 mAh
Battery energy
36Unconfirmed, see note 5
Battery life
Up to 10 h indoor with standard battery (WLAN on, 50 % backlight)
Hot-swap battery
Yes (internal supercapacitor keeps power during battery swaps)
Replaceable battery
Yes
Ports and expansion
2 x USB 3.1 Type A; 1 x USB 3.1 Type C (DisplayPort 1.2); docking connector; keyboard connector; 1 x USB 2.0 (rear); optional SE55 scan engine
Docking
Docking connector (charge and data); vehicle and desk accessories in BARTEC accessory sheet
Keyboard
Keyboard connector for accessories (not 2-in-1)

Controls & Accessibility

Keys
Power, scan, up/down (volume or brightness), three programmable keys
Push-to-talk key
No
Glove touch
Yes

Fleet and support

Manufacturer
BARTEC GmbH, Germany

Only specifications we could check are listed. A numbered marker next to a value means it is unconfirmed: it comes from a single or secondary source, or sources disagree. The matching note at the foot of the page explains each one. See the BARTEC GmbH website for the full data sheet.

Compare

How it compares

Best in this comparison

BARTEC ET60/65EX2 Android compared with its closest alternatives
BARTECBARTEC ET60/65EX2 AndroidThis tablet
GetacGetac ZX10-EX G2
AtexxoAtexxo Zone 2 Galaxy Tab Active5 Pro
TypeRugged tablet, Ex versionRugged tablet, Ex versionConverted tabletDedicated Ex tablet
Screen size10.1-inch10.1-inch10.1-inch10.1-inch
AvailabilityCurrentCurrentCurrentCurrent
Gas zonesZone 2Zone 2Zone 2Zone 2
Dust zonesZone 22Zone 22Zone 22Zone 22
ProtectionIntrinsic safety (Ex ic) with inherently safe optical radiation (op is)Intrinsic safety (Ex ic) with inherently safe optical radiation (op is)Increased safety and intrinsic safety (Ex ec ic)Intrinsic safety (Ex ic)
Gas groupIICIICIICIIC
Temperature classT4T4T4T4
CertificationATEX + IECExATEX + IECExATEXATEX + IECEx
North AmericaClass I Division 2——Class I Division 2
Ambient temperature−20 °C to +55 °C−21 °C to +55 °C—−20 °C to +55 °C
Charging in the Ex areaNot allowedNot allowed—Allowed (see conditions)
Operating systemAndroid 14Android 15Android 16Android 14
Security updatesUntil December 2031Until December 2029Until May 2033 (best in this comparison)Until Q4 2032
Weight1074 g1050 g (best in this comparison)1200 g1059 g
Display10.1-inch Optically bonded, multi-mode capacitive touch, Corning Gorilla Glass10.1-inch TFT LCD, LumiBond bonded10.1-inch TFT LCD, 120 Hz adaptive; Corning Gorilla Glass Victus+10.1-inch Corning Gorilla Glass V3 (3rd generation), usable with gloves
5GYesYesYesYes
Pen / stylusStylus supportedDigitizer pen (datasheet); capacitive stylus named in certificateS Pen supportedPassive stylus available as accessory (IS-Stylus Set, 'stylus for operating touch screens'); not in the box
Replaceable batteryYesYes—Yes
Hot-swap batteryYes (internal supercapacitor keeps power during battery swaps)———
PriceOn requestOn requestOn requestOn request

FAQ

Common questions

Is the BARTEC ET60/65EX2 Android certified for Zone 1?

No. It is certified for Zone 2/22 only, so it can be used in Zone 2 but not in Zone 1.

Can the BARTEC ET60/65EX2 Android be used in Zone 0?

No. It is not certified for Zone 0. Zone 0 needs equipment with protection level Ga, such as Ex ia intrinsic safety.

What type of explosion protection does the BARTEC ET60/65EX2 Android use?

It is intrinsically safe: intrinsic safety (Ex ic) with inherently safe optical radiation (op is). Intrinsic safety limits the electrical and thermal energy in the device below the level that could ignite the surrounding atmosphere.

What does T4 mean for the BARTEC ET60/65EX2 Android?

Its surface stays below 135 °C, so it is suitable for gases that only ignite above that temperature. Check the ignition temperature of the substances on your site.

Can you charge the BARTEC ET60/65EX2 Android in a hazardous area?

No. The certificate only allows charging outside the hazardous area.

Which ports and accessories can be used with the BARTEC ET60/65EX2 Android in the hazardous area?

Ports (USB-A, USB-C, dock, keyboard connector) only if the atmosphere is shown to be absent; charging accessories are required but not included.

What operating system does the BARTEC ET60/65EX2 Android run?

Android 14. Security updates are expected until at least December 2031.

How much does the BARTEC ET60/65EX2 Android cost?

Prices for certified hazardous-area tablets depend on volume, configuration and region, so they are on request. Contact us for a price.

Notes on unconfirmed values

  1. Zebra's security-update date for the ET60/ET65 the tablet is built on; BARTEC says it needs a LifeGuard service contract.
  2. Approximate: the maker doesn't publish a launch date. Based on the certificate date or the maker's announcement.
  3. From a single or secondary source; the maker doesn't state it for this model.
  4. BARTEC's product page gives IP64 and its datasheet IP66; IP64 is the figure in the Ex marking.
  5. Calculated from the maker's battery capacity and voltage; the maker doesn't state watt-hours.

Sources and verification

Facts last verified on against:

Always check the certificate for your exact model before use. Spotted an error? Tell us.