
BARTEC · Rugged tablet, Ex version
BARTEC ET60/65EX2 Windows
- Zone 2/22
- ATEX
- IECEx
- IIC
- T4
The BARTEC ET60/65EX2 Windows is the hazardous-area version of a BARTEC rugged 10.1-inch tablet, certified for Zone 2/22 under ATEX and IECEx. It is an intrinsically safe (Ex ic) design running Windows 11 Professional.
- Certified for
- Zone 2/22
- Protection
- Intrinsic safety (Ex ic) with inherently safe optical radiation (op is)
- Screen
- 10.1-inch
- Temperature class
- T4 (≤ 135 °C)
- Ambient temperature
- −20 °C to +55 °C
- Operating system
- Windows 11 Professional
- Security updates
- Supported while kept on a current Windows 11 version
- Weight
- 1200 g
- Price
- On request
Overview
Strengths and limitations
Strengths
- ATEX and IECEx certified, with published certificate numbers
- Optional built-in barcode imager
- 5G connectivity
- User-replaceable battery
- Hot-swappable battery for long shifts
Limitations
- Zone 2 only, so not for Zone 1 areas
- T4 temperature class: fine for most gases, but not those that ignite below 135 °C
Best for
Certification
Where you can use it
Gas
- Zone 0not certified.Explosive gas present continuously or for long periods
- Zone 1not certified.Explosive gas likely in normal operation
- Zone 2certified.Explosive gas unlikely, and only briefly
Dust
- Zone 20not certified.Combustible dust present continuously or for long periods
- Zone 21not certified.Combustible dust likely in normal operation
- Zone 22certified.Combustible dust unlikely, and only briefly
The Ex marking, decoded
Gas atmospheresZone 2
II3GExicop isIICT4Gc
IIEquipment group- Group II: equipment for surface industries (not mining).
3GATEX category- Category 3 for gas: suitable down to Zone 2.
ExExplosion protected- Certified to the IEC 60079 / EN 60079 series.
icProtection type- Intrinsic safety, level "ic": safe in normal operation. Zone 2 only.
op isProtection type- Inherently safe optical radiation: light from the camera flash or torch is limited below the level that could ignite the atmosphere.
IICGas group- Gas group IIC, e.g. hydrogen and acetylene. The most demanding group; also covers IIA and IIB.
T4Temperature class- Surface stays below 135 °C. T6 is the strictest class.
GcProtection level- Equipment protection level Gc (enhanced): suitable for Zone 2.
Dust atmospheresZone 22
II3DExicop isIIICT135°CDcIP64
3DATEX category- Category 3 for dust: suitable down to Zone 22.
IIICDust group- Dust group IIIC: conductive dust. The most demanding group; also covers IIIA and IIIB.
T135°CMax surface temperature- Surface stays below 135°C in dust.
DcProtection level- Equipment protection level Dc (enhanced): suitable for Zone 22.
IP64Ingress protection- Dust-tight; protected against splashing water.
IIExicop is as above.
Gas atmospheresZone 2
Exicop isIICT4Gc
ExExplosion protected- Certified to the IEC 60079 / EN 60079 series.
icProtection type- Intrinsic safety, level "ic": safe in normal operation. Zone 2 only.
op isProtection type- Inherently safe optical radiation: light from the camera flash or torch is limited below the level that could ignite the atmosphere.
IICGas group- Gas group IIC, e.g. hydrogen and acetylene. The most demanding group; also covers IIA and IIB.
T4Temperature class- Surface stays below 135 °C. T6 is the strictest class.
GcProtection level- Equipment protection level Gc (enhanced): suitable for Zone 2.
Dust atmospheresZone 22
Exicop isIIICT135°CDcIP64
IIICDust group- Dust group IIIC: conductive dust. The most demanding group; also covers IIIA and IIIB.
T135°CMax surface temperature- Surface stays below 135°C in dust.
DcProtection level- Equipment protection level Dc (enhanced): suitable for Zone 22.
IP64Ingress protection- Dust-tight; protected against splashing water.
Exicop is as above.
Versions
Marking versions
The certification covers more than one version: ATEX with scan engine: II 3G Ex ic op is IIC T4 Gc; without: II 3G Ex ic IIC T4 Gc | IECEx the same without 'II 3G' | ATEX with scan engine: II 3D Ex ic op is IIIC T135°C Dc IP64; without: II 3D Ex ic IIIC T135°C Dc IP64 | IECEx the same without 'II 3D'
Safe use
Rules for the hazardous area
- Ambient temperature (Ta)
- −20 °C to +55 °C
- Charging
- Outside the hazardous area only
- Battery swap
- Outside the hazardous area only
- Ports and accessories in the zone
- Ports (USB-A, Thunderbolt/USB-C, dock, keyboard connector) only if the atmosphere is shown to be absent; the supplied screws locking the I/O ports and the battery must be tightened when used in hazardous areas; charging accessories are required but not included.
- Certified accessories
- Named in IECEx EPS 26.0013X as 'accessories for use in hazardous areas': battery B7-T2Z0-0002 (7.6 V / 4460 mAh), kickstand with hand strap B7-T2Z0-0003, hand strap B7-T2Z0-0004, shoulder strap B7-T2Z0-0006, stylus holder B7-T2Z0-0009, screen protector B7-T2Z0-0011, leather holster B7-T2Z0-0012, 4-point belt B7-T2Z0-0013, integrated stylus B7-T2Z0-0014, stylus 17-S1Z0-0008. Battery changing and charging only outside hazardous areas.
- IP code in the Ex certificate
- IP64 (marking)
- Operating temperature
- −20 °C to +55 °C
Conditions of use
IECEx X conditions: battery pack changed or charged only outside hazardous areas; only battery pack type B7-T2Z0-0002 shall be used; connection or disconnection of external ports, opening the enclosure or replacing the battery live only if the atmosphere is shown to be absent; protect from high-energy impacts and high electrostatic charge; follow the manufacturer's safety instructions.
Specifications
Full specifications
Certification
- ATEX marking
- II 3G Ex ic op is IIC T4 Gc / II 3D Ex ic op is IIIC T135°C Dc IP64
- ATEX certificate
- EPS 26 ATEX 1 034 X
- IECEx marking
- Ex ic op is IIC T4 Gc / Ex ic op is IIIC T135°C Dc IP64
- IECEx certificate
- IECEx EPS 26.0013X (Issue 0, 2026-07-21)
- Other approvals
- CE, FCC/IC
- Protection level (EPL)
- Gc / Dc
- Dust group
- IIIC
- Max surface temperature (dust)
- 135 °C
Device
- Type
- Rugged tablet, Ex version
- Launched
- 2026Unconfirmed, see note 1
- Part numbers
- B7-T2E*-*W********** (type B7-T2E*-*W******K*00)
- Operating system
- Windows 11 Professional
- Edition
- Windows 11 Professional (64-bit); feature version not stated
- OS upgrades
- Windows 11 feature updates (no fixed limit)
- Security updates
- Supported while kept on a current Windows 11 version
- Processor
- Intel Core Ultra 5 125U
- Processor architecture
- x86
- Memory (RAM)
- 16 GB
- Storage
- 256 GB
Field capabilities
- Push-to-talk
- Via app (programmable keys; PTT app)
- Emergency / SOS
- Via app (three programmable keys, no dedicated SOS key)
- Lone worker
- Via app (third-party application)
- Barcode scanning
- Built in (optional SE55 1D/2D Advanced Range scan engine; changes the Ex marking to 'op is')
- NFC reading
- Built in (NFC)
- 3D scanning / LiDAR
- Not possible (no depth sensor listed)
- Remote expert / video calls
- Via app (rear and front cameras, privacy shade; third-party app)
- Windows desktop software
- Built in (Windows 11 Professional, x86)
Display and camera
- Display
- 10.1-inch Optically bonded capacitive multi-touch, Corning Gorilla Glass, contrast 1000:1
- Resolution
- 1920 × 1200 (WUXGA; page prints 1900 × 1200)
- Brightness
- 1000 nits
- Outdoor readability
- 1000-nit display, 'easy to see' in bright sunlight (maker)
- Touch
- Bare finger, heavy-gloved finger or active/passive stylus (maker); use in heavy rain claimed
- Pen / stylus
- Passive stylus included (AI-powered touch control)
- Rear camera
- 13 MP autofocus with LED flash
- Front camera
- 5 MP RGB with mechanical privacy shade
Connectivity
- Network
- ET60 Wi-Fi 7; ET65 adds 5G NR / LTE
- Wi-Fi
- Wi-Fi 7 (802.11be)Unconfirmed, see note 2
- Bluetooth
- Bluetooth 5.4 Class 1 + LE
- NFC
- Yes (ISO 14443 A/B, MIFARE, FeliCa, ISO 15693, NFC Forum 1-4)
- Satellite positioning
- ET65: GPS, GLONASS, BDS, Galileo, QZSS
- SIM
- ET65: eSIM + nano-SIM
Physical and power
- Weight
- 1200 g
- Dimensions
- 275 × 199 × 18.3 mm
- Ingress protection
- IP66
- Ruggedness
- 1.5 m to concrete exceeds MIL-STD-810H; 1.8 m to plywood
- Battery
- 4460 mAh
- Battery energy
- 33.9 Wh
- Hot-swap battery
- Yes (true hot swap, minimum 60 seconds)
- Replaceable battery
- Yes
- Ports and expansion
- 1 x USB 3.1 Type A; 2 x Thunderbolt 4/USB4 Type C; docking connector; keyboard connector; 1 x USB 2.0 (rear); optional SE55 scan engine
- Keyboard
- Keyboard connector for accessories
Controls & Accessibility
- Keys
- Power, scan, up/down (programmable), three programmable keys
- Push-to-talk key
- No
- Glove touch
- Yes
Fleet and support
- Manufacturer
- BARTEC GmbH, Germany
Only specifications we could check are listed. A numbered marker next to a value means it is unconfirmed: it comes from a single or secondary source, or sources disagree. The matching note at the foot of the page explains each one. See the BARTEC GmbH website for the full data sheet.
Compare
How it compares
Best in this comparison
BARTECBARTEC ET60/65EX2 WindowsThis tablet | ||||
|---|---|---|---|---|
| Type | Rugged tablet, Ex version | Rugged tablet, Ex version | Rugged tablet, Ex version | Rugged tablet, Ex version |
| Screen size | 10.1-inch | 10.1-inch | 10.1-inch | 11.6-inch |
| Availability | Current | Current | Current | Current |
| Gas zones | Zone 2 | Zone 2 | Zone 2 | Zone 2 |
| Dust zones | Zone 22 | Zone 22 | — | Zone 22 |
| Protection | Intrinsic safety (Ex ic) with inherently safe optical radiation (op is) | Intrinsic safety (Ex ic) with inherently safe optical radiation (op is) | Intrinsic safety (Ex ic) | Intrinsic safety (Ex ic) |
| Gas group | IIC | IIC | IIC | IIC |
| Temperature class | T4 | T4 | T4 | T4 |
| Certification | ATEX + IECEx | ATEX + IECEx | ATEX + IECEx | ATEX |
| North America | — | — | Class I Division 2 | — |
| Ambient temperature | −20 °C to +55 °C | −21 °C to +55 °C | −10 °C to +50 °C | — |
| Charging in the Ex area | Not allowed | Not allowed | Not allowed | Not allowed |
| Operating system | Windows 11 Professional | Windows 11 Pro | Windows 11 IoT Enterprise LTSC | Windows 11 Pro |
| Security updates | Supported while kept on a current Windows 11 version | Supported while kept on a current Windows 11 version | Until October 2034 | Supported while kept on a current Windows 11 version |
| Weight | 1200 g | 1150 g (best in this comparison) | 1200 g | 1490 g |
| Display | 10.1-inch Optically bonded capacitive multi-touch, Corning Gorilla Glass, contrast 1000:1 | 10.1-inch TFT LCD, LumiBond optically bonded, anti-static film | 10.1-inch IPS LED, optical bonding, anti-glare | 11.6-inch |
| 5G | Yes | Yes | Yes | Yes |
| Pen / stylus | Passive stylus included (AI-powered touch control) | Dual-mode touch with digitizer pen | Capacitive stylus (included) | Optional digitizer |
| Replaceable battery | Yes | Yes | Yes | Yes |
| Hot-swap battery | Yes (true hot swap, minimum 60 seconds) | — | Yes, hot-swappable battery (swap outside hazardous areas per the Ex certificate) | Optional bridge battery, 5 minute swap |
| Price | On request | On request | On request | On request |
FAQ
Common questions
Is the BARTEC ET60/65EX2 Windows certified for Zone 1?
No. It is certified for Zone 2/22 only, so it can be used in Zone 2 but not in Zone 1.
Can the BARTEC ET60/65EX2 Windows be used in Zone 0?
No. It is not certified for Zone 0. Zone 0 needs equipment with protection level Ga, such as Ex ia intrinsic safety.
What type of explosion protection does the BARTEC ET60/65EX2 Windows use?
It is intrinsically safe: intrinsic safety (Ex ic) with inherently safe optical radiation (op is). Intrinsic safety limits the electrical and thermal energy in the device below the level that could ignite the surrounding atmosphere.
What does T4 mean for the BARTEC ET60/65EX2 Windows?
Its surface stays below 135 °C, so it is suitable for gases that only ignite above that temperature. Check the ignition temperature of the substances on your site.
Can you charge the BARTEC ET60/65EX2 Windows in a hazardous area?
No. The certificate only allows charging outside the hazardous area.
Which ports and accessories can be used with the BARTEC ET60/65EX2 Windows in the hazardous area?
Ports (USB-A, Thunderbolt/USB-C, dock, keyboard connector) only if the atmosphere is shown to be absent; the supplied screws locking the I/O ports and the battery must be tightened when used in hazardous areas; charging accessories are required but not included.
What operating system does the BARTEC ET60/65EX2 Windows run?
Windows 11 Professional. Windows 11 has no fixed end date: Microsoft supports each version for about two years, so it keeps getting security updates while it's kept on a current version.
How much does the BARTEC ET60/65EX2 Windows cost?
Prices for certified hazardous-area tablets depend on volume, configuration and region, so they are on request. Contact us for a price.
Notes on unconfirmed values
- Approximate: the maker doesn't publish a launch date. Based on the certificate date or the maker's announcement. Return to note 1
- From a single or secondary source; the maker doesn't state it for this model. Return to note 2
Sources and verification
Facts last verified on against:
- BARTEC GmbH: ATEX certificate EPS 26 ATEX 1 034 X, ET60/ET65 EX2 Windows
- IECEx online certificate database: IECEx EPS 25.0018X issue 0 (2025-08-26), ET60/ET65 EX2 Android
- IECEx online certificate database: IECEx EPS 26.0013X issue 0 (2026-07-21), ET60/ET65 EX2 Windows
- Microsoft: Lifecycle: Windows 11 Home and Pro (25H2 end listed 10/13/2027; 24H2 10/14/2026)
- BARTEC GmbH: Datasheet ET60/65EX2 Windows (2026-08)
- BARTEC GmbH: ET60/65EX2 Windows Tablet product page
Always check the certificate for your exact model before use. Spotted an error? Tell us.


